How to update Verizon Galaxy Note 2 (SCH-I605) with Android 4.2.2 Jelly Bean Carbon ROM
Website design By BotEap.comIf you have Verizon Galaxy Note 2 (SCH-I605) and you want to update your device with Android 4.2.2 operating system, you can use the latest custom firmware called Carbon ROM. This unofficial firmware will provide better performance and improved features. Carbon ROM is in the development stage and therefore the firmware installation may cause some problems or errors on the device.
Website design By BotEap.comFirmware features:
Website design By BotEap.comThere are various features that come bundled with Android Jelly Bean Carbon ROM and some of them are as follows:
Website design By BotEap.com• Improved speed including Linaro -O3 and specific processor optimizations.
Website design By BotEap.com• Carousel lock screen
Website design By BotEap.com• Customizable sliders and lock screen button
Website design By BotEap.com• Navigation bar widgets
Website design By BotEap.com• Customizable hardware and software keys
Website design By BotEap.com• Theme engine
Website design By BotEap.com• Quiet hours and others.
Website design By BotEap.comStep by step guide:
Website design By BotEap.comThe following steps will allow you to install the latest firmware on your Galaxy Note 2. Before starting the installation, make sure the USB drivers for your phone are installed on your PC, all important data is backed up, and the phone is backed up. is charged with at least 80% of the battery charge.
Website design By BotEap.comStep 1:
Website design By BotEap.comFirst of all, you need to download the Carbon ROM zip file and Google apps on your desktop.
Website design By BotEap.comStep 2:
Website design By BotEap.comNext, taking a USB cable, connect your Galaxy Note 2 to your desktop and the files that are downloaded in the first step are now copied to the phone’s SD card. You only need to copy the files and not extract them.
Website design By BotEap.comStep 3:
Website design By BotEap.comNow remove the USB cable and unplug and also turn off the power of your device.
Website design By BotEap.comStep 4:
Website design By BotEap.comNext, you need to boot your Galaxy Note 2 into CWM Recovery and this can be done by pressing and holding the Volume Up, Home and Power buttons together until the Samsung logo appears on the screen. Then you need to leave the keys for about half a second and then hold them together again. You will now see the CloclworkMod Recovery screen.
Website design By BotEap.comStep 5:
Website design By BotEap.comThe next step is to perform the Nandroid backup function of the existing ROM and to do this you must make the selection of the Backup and Restore option, which you must choose the Backup option again on the next screen. Once the backup process is complete, you should proceed to the main recovery menu.
Website design By BotEap.comThe Nandroid backup is done so that in case the new ROM doesn’t work properly or you want to go back, you can restore it later.
Website design By BotEap.comStep 6:
Website design By BotEap.comThe next step is to perform the data wipe task by opting for the Wipe data / factory reset option, after which Yes is selected to confirm the task. The erase task will take a few minutes to complete, after which you will need to return to the CWM Recovery main menu.
Website design By BotEap.comStep 7:
Website design By BotEap.comNext, you need to opt for the “wipe cache partition” option and once completed, opt for “Clear Dalvik Cache” which is present in the Advanced option.
Website design By BotEap.comStep 8:
Website design By BotEap.comNow from your SD card you need to make the selection of “install zip from sdcard” and then “choose zip from sdcard”. The Carbon ROM file that was previously copied to your phone’s SD card should now be located and selected with the power key, after which its installation process is confirmed.
Website design By BotEap.comStep 9:
Website design By BotEap.comAfter the successful installation of the ROM file, you need to repeat the above step for the installation of the Google Apps file again.
Website design By BotEap.comStep 10:
Website design By BotEap.comWhen the installation of the ROM file and Google Apps is complete, you need to go back to the main menu and choose to reboot system now to restart your phone. You have to boot into the custom Android JB ROM Carbon. It will take some time for the first boot to complete.
Website design By BotEap.comConclution:
Website design By BotEap.comSo, by following the steps above carefully, you will be able to install the Carbon ROM on your Galaxy Note 2 I605.