Self Adhesive Vinyl Tile Application

Website design By BotEap.comVinyl mosaic tiles are an easy and affordable DIY project that can have you enjoying your new vinyl flooring in less than 48 hours. Self-adhesive vinyl tile is a great choice for flooring in your kitchen, bathroom, or any room, mimicking the look of ceramic and stone tile, but at a much lower cost. Applying self-adhesive vinyl tile is easy and requires no specialist knowledge other than a bit of familiarity with other DIY projects.

Website design By BotEap.comPreparation

Website design By BotEap.comTo install self-adhesive vinyl flooring you will need a flat, dry and clean surface. They can be installed over concrete, but you may need to use a self-leveling floor filler to ensure the subfloor is completely flat. If you are installing over old, sound wood or vinyl, sand any uneven surfaces and fill any cracks or low spots with a suitable material. Clean the floor thoroughly, removing all dirt and grease or adhesive residue with suitable products, and wait until it is perfectly dry. Some people choose to hire space heaters to thoroughly dry out the room if it is not a well-ventilated area of ​​the house.

Website design By BotEap.comWhile you’re doing this, leave the new self-adhesive vinyl tile inside the house so the glue sets into the environment where it will be installed.

Website design By BotEap.comMeasurements

Website design By BotEap.comTo ensure a professional-looking installation, you’ll want to start laying vinyl tile from the center of the room and not from one wall. The easiest way to find the center of the room is to draw a chalk line between the midpoints of each of the two opposite pairs of walls. For the installation to look perfect, you need to make sure that there is more than half of a tile left on the tile that will touch everything.

Website design By BotEap.comIf you plan to use different colored tiles to create a unique pattern, you should consider laying them now without removing the paper from the back of the tiles. This will allow you to refine your design and you can use the chalk to draw guide lines.

Website design By BotEap.comSelf Adhesive Vinyl Tile Installation

Website design By BotEap.comOnce you’ve established the guide lines, you can begin installing vinyl tile. Peel the paper backing off a self-adhesive vinyl tile, position it at the center starting point, and press into place. Lay the next tile right next to the edge of the already installed tile and continue to do so until the row is complete. If you need to cut a tile to fit against the wall, you can use a utility knife to cut it. Once the entire room is covered in tiles, a roller can be used to make sure the tiles are evenly glued to the floor.